Tweet
My wheel bearing is going bad in a 92+ dana 30 and ive got an extra wheel bearing from a 89 dana 30 will it fit?
thanks in advance.
thanks in advance.
-
-
i don't think so, a 89 didn't fit in my 90 front end, the outer ring i think is longer and will rub on thingsGod made the world in seven days, on the 7th day, he made the Le Car
Real Jeeps have Unibodys -
Not positive, but I think Dave's right.2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
-
just look up the part numbers for each and see if they are the same.
D30 have 2 different style hubs if I'm not mistaken one is set in a little farther hard to tell until the axle will not spin.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
You guys were right, the 92+ hubs sit out further than the 89 hubs, it made my rotor rub on my knuckle, so I shimmed my rotor out a little it will have to do till my new hub comes.Comment
Comment