Tweet
I plan on going SOA on the Comanche. My question is: I've heard that MJ springs are further apart than those on an XJ. Is this true? I have the old chryco axle out of my cherokee from swapping in Pete's axle, and wondered if it could bolt right up without having to grind off and attach new perches. If they are wider, by how much? Do I need to weld them with a preset angle to correct the pinion to compensate for going SOA instead of spring under?
-
2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space Program -
Go to bedI don't always drink orange juice, but when I do, I prefer to chew it. #madpulp -
Originally posted by ninetysix-ex-jay View Post
Isn't it past YOUR bedtime?
Or does your height fool me?
2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
-
Wow... sick overplayed burn.
Jon... I hate it when people get short with you. I got your back Jon.2013 F150 fx4 (Tow Pig/DD)- 5.0 with the 3.73 option
2003 TJ Rubicon- 4.0/42rle/np241or
- 5.13's
- 3" Savvy/Currie suspension with acos
- 33” BFG KO2s
Comment
-
2013 F150 fx4 (Tow Pig/DD)- 5.0 with the 3.73 option
2003 TJ Rubicon- 4.0/42rle/np241or
- 5.13's
- 3" Savvy/Currie suspension with acos
- 33” BFG KO2s
Comment
-
^^ sold. But it would of ben sweet. Rob, you will need to change your spring mounts, shock mounts, etc... You will need to find the correct pinion angle too.
Look here.
http://www.ruffstuffspecialties.com/catalog/index.phpLast edited by Bigbike; 07-24-2010, 09:10 AM.-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff.Comment
-
If the widths are the same, and I would think they are, just throw an 8.25 under it, which is already setup up for SOA, then as long as the pinion angle is fine you should be all set.98 Cherokee, D30/8.25 w/4.56s locked F/R -- 3 link front IRO springs rear with shackle relocation, one ton steering w/heims, hybrid cage under contruction, 33'' KM2'sComment
-
They arent the same, MJ springs are further part than XJ springs I think.-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff.Comment
-
just get some new antiwrap perches. cuttin perches off and weldin new ones are aint no big thang.
and yes, figure out your pinion angle while you are doing thisComment
-
you sure its not a dana 35?
97 TJ that I think is pretty neat.
Comment
-
Dont you have an MJ and an XJ?Originally posted by SwampThing View Post
This shouldnt be a hard question to answer yourself
2 Broncos are better than 1Comment
-
Touché, salesmanOriginally posted by CumminsJeep View Postyou sure its not a dana 35?2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
-
Both the Comanche, and the axle are in your driveway aren't they? Go outside and use a tape measure.
Comment
-
nope. axle's over at Caleb's.Originally posted by Even View PostBoth the Comanche, and the axle are in your driveway aren't they? Go outside and use a tape measure.2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
Comment