anyone have this problem

[treadlightly5337]

all that have the RE1660 and RE1665 track bar set.
has you had and clunking issues, if so what the hell did you so to fix it.
all info need!

[crosbike]

make sure all the bolts are nice and tight. i bought the brace too which im sure helped. also the axle side hole may be wallowed out.

[treadlightly5337]

make sure all the bolts are nice and tight. i bought the brace too which im sure helped. also the axle side hole may be wallowed out.

i have been thinking about the brace. also with the hole thing i welded a thick plate on there just incase. i was just outside torque frame side to 110 and axle to 80 ft/lbs

[Fuzzy Wuzzy]

you can probably tighten it down even more than that. I would make it like that especially if you run full time w/o sways

[treadlightly5337]

alright i tighten it more. rubicon said that it might be because the sleeve in the bushing isnt long enough we shall see they are sending me one