Snapped the bottem steering bow bolt off!

[cherokee-at-16]

Ok so i snapped the bottem steering box bolt off! Started to just drill it out...is This what i should be doing?, dont know what else i would do? open to options if theres and easier rout.

[crosbike]

drilling a small hole for an easy out on the jeep will be difficult but doable or pull the box off the jeep completely and easy out it

[cherokee-at-16]

after i drill the hole what an i suposed to do to get the thread part out????????????

[ninetysix-ex-jay]

I have a box if you need it, $20

[LittleD]

use a "easy out" drill bit. it grabs from the inside of the hole and unscrews the thread part.

[cherokee-at-16]

I have a box if you need it, $20

Is it a power steering box that will work on a 2000, works good, and doesnt have any bolts broke off inside,. I will think about it thanks going to see how well my drill can do first.

[ninetysix-ex-jay]

Is it a power steering box that will work on a 2000, works good, and doesnt have any bolts broke off inside,. I will think about it thanks going to see how well my drill can do first.

Yeah its from a 2000. If you're interested I'll take a look to see if nothing is broken off inside it but right now its too cold so I'll be a vagin about it