Lift installs

[LittleD]

i have either a stock one or a rusty's in mine now, only had problems with the drop bracket coming loose. which is now welded to the unibody

[hippie metal]

I'd put my life in the hands of the stock one, before ever running a Rustys Trac-bar again

[OTTE]

Really you shouldnt run a stock tracbar with any more than 3" of lift. Id say wait to install the lift till you have the RE tracbar and bracket.

[hippie metal]

Really you shouldnt run a stock tracbar with any more than 3" of lift. Id say wait to install the lift till you have the RE tracbar and bracket.

x2

[Even]

PB Blaster is good stuff, but recently I have been using a 50-50 mixture of Acetone and ATF that I put in a squirt bottle. It works amazing and if you buy in bulk it's much cheaper.

[skippy]

Really you shouldnt run a stock tracbar with any more than 3" of lift. Id say wait to install the lift till you have the RE tracbar and bracket.

x2

x3.
even though i'm not one to talk, i still run the stock one, but my axle is way off center anyways..and i definitely feel it going over bumps.

[Pedro]

spray all the bolts down for a good week before attempting to unbolt anything. I sprayed mine for a week and still broke bolts. The Rusty's bar will be fine for the time being. I bet 99% of people don't have problems with them. Plus you need it for that high of lift. However, I do recommend getting a stronger one from RE or JKS in the near future.

[Clause]

put the stock track bar in a press and straighten out the bends in it slowly. this will give you extra length you need.

[Ktmracer419]

Despite all the hate for the rustys trackbar, it will get you around while you wait for the new one, I've had mine for a year now and it hasn't snapped or bent in any fashion

i have never seen you wheel. so YOUR OPINION DONT MATTER

its better than running the stock one though right ?

just put it in. maybe .05% of people who run his trackbars have problems, but the other 99.5% of people don't wheel and do stupid crap like us young hooligans do

spray all the bolts down for a good week before attempting to unbolt anything. I sprayed mine for a week and still broke bolts. The Rusty's bar will be fine for the time being. I bet 99% of people don't have problems with them. Plus you need it for that high of lift. However, I do recommend getting a stronger one from RE or JKS in the near future.

i didnt spray down any bolt and didn't snap one

[Hydra]

i have never seen you wheel. so YOUR OPINION DONT MATTER

OERII fool

[Ktmracer419]

OERII fool

doesnt mean i saw u FOOL

[Hydra]

doesnt mean i saw u FOOL

Congrats

[Ktmracer419]

Congrats

i have seen you hold more dead pigeons than wheel your rustys trackbar

[Hydra]

i have seen you hold more dead pigeons than wheel your rustys trackbar

That is because dead pigeons are way more of an attraction than me wheeling I spose.....

We've all got our talents