Tweet
Im reading up on cutting brakes but I have a few questions still. Can I use cutting brakes set up for the front and the rear with a single handle? So that both brakes on the same axle lock up when I push or pull the lever?
-
-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff. -
yes you need double in double out.
so one master is for the front and one for the rear.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts -
So that means Ill need a twin handle one, correct.-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff.Comment
-
If I was gonna bother with a hydro setup, I'd do a left/right cutting brake rear, keep my e-brake, and add a line-lock up front.
If I were to spend the money on a twin-handle setup, then Id still do that, but then have the front axle plumbed to the second handle left/right.
but hey, thats just me."Watching you work on your Jeep is like watching a doctor operate on a cadaver...
It may be good practice, but in the end it won't do much good." -My Mother.Comment
-
RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
Comment