dana 60 high steer

[hoggie101]

i want to run a high steer up since my axles already have the arms on them and every thing but im scared that the arms will just break off with 37's and hydro assit its only the four bolts holding it on it looks like. am i just being paranoid?

[justtorchit]

I would be worried about the knuckles cracking first.

[hoggie101]

I would be worried about the knuckles cracking first.

Im gonna be plateing them with 1/4 the best I can, harrys idea looked good wraping it around

[justtorchit]

Yup. That's the way to go.

If you have access to a mill you could key the arms and knuckles for a little extra insurance.

[hoggie101]

Can I reuse the kingpin stuff or should you replace it afteryou take it apart

[Harry]

Do you need high steer with the amount of lift you have? Last pic I saw of your setup made the steering look like it was gonna want to munch the oil pan. At 4.5" of lift, my steering angles are really good without high steer.

[customcreationsllc]

I beat the crap out of my arms with 35s but I wheel hard no issues.
I think it will take a lot for you to have an issue.
eventually everything breaks

[Zullock Holmes]

If you have access to a mill you could key the arms and knuckles for a little extra insurance.

This.

Without a doubt.

[Pete]

I run 36's, hydro assist, and high steer behind the axle. no issues at all