Steering

[Jeepbonehead]

who has made their own 1 ton steering before?? i need help

[Even]

what do you need help with

[Ktmracer419]

i did

[customcreationsllc]

I can make them too. What do you need help with?

[Buffalo Phil]

Vague Questions FTW.

[Jeepbonehead]

i can buy the 1 high steer arm the TRE's and inserts, but i need help welding them and finding the measurements for the DOM length

[customcreationsllc]

Buy too much tubing, then you measure after you get the TRE on with the jam nuts and inserts installed about half way so you got adjustment both ways cut the tub to length and weld it on.
How much more do you need to know?

[Jeepbonehead]

if i buy all the tube and TRE's, and inserts, how much would you charge to help me with the install and welding

[Ktmracer419]

[Fuzzy Wuzzy]

if i buy all the tube and TRE's, and inserts, how much would you charge to help me with the install and welding

just come over here and we'll get it done.

[Jeepbonehead]

please help, i have about $450-500 for steering which includes TRE's high steer arms and both the tie-rod and drag link. i want to do BTF high steer arms, does anyone know where or exactly what to buy

[Even]

i got this

http://completeoffroad.com/i-124127-...44-and-60.html

if you aren't going to run an inverted-t im sure you could call them and order the kit with 4 regular TRE's instead of the inverted-t style

[Jeepbonehead]

you rock i'm buying that, any clue if those TRE's are the same an GM 1 tons

[grundlepunch]

you got a 60 front right? that should just slide in
and if your full width i would double check to make sure you have the correct lengths

[Jeepbonehead]

i'm going to buy that and put it on 2 BTF high-steer arms, all the steering will be hi above the axle and leaf packs away from evil rocks