Tweet
So the pinion guard on my 44 has come loose and is spinning causing a horrid noise. From my understanding its a pressed fit so how do I go about securing it back on the axle?
-
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulp -
Pinion guard?-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff. -
Googled it and a pic of Phils jeeps comes up on page two
-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff.Comment
-
Pictures would help but my suggestion would be to just cut it off.
I would love to get a solid pinion guard on a dana axle but I just couldn't think of a solid way. with out adding 40lbs
If you have a removable pinion support like 9" or 14bolt then go for it.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
Maybe something like this
RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
he means the little circular shield that protects the pinion seal- Will
Originally posted by fizzyOriginally posted by DizzDizzComment
-
o that stupid thing just rip it off.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
Originally posted by customcreationsllc View Post that won't limit the seal life?
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
Haven't had one on mine for a yearComment
-
hahaha your rightOriginally posted by Bigbike View PostGoogled it and a pic of Phils jeeps comes up on page twoDizz dizz go sleep sleep
Driver 4677 FSM vehicleComment
-
do you really think that little dust shield is going stop anything major?
Plus our pinions will break before they seal wears a groove.
Some pinions don't even come with them.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
I'm just thinking sand or grit will gets into the seal obviously lessening the life span. That cover is ment to deflect most small debris. I'm not talking about a rock here or that it strengthens the pinion at allI don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
jb weld that bitch on
srs- Will
Originally posted by fizzyOriginally posted by DizzDizzComment
-
usually you have to dtive offroad for that to happenOriginally posted by ninetysix-ex-jay View Post
Dizz dizz go sleep sleep
Driver 4677 FSM vehicleComment
-
Great I'm that guy now.Originally posted by fizzy View Postusually you have to dtive offroad for that to happenI don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
Comment