Tweet
is there a way to get the bolt on the axle side out because my are fused in and ive tired turning both left and right and hitting them but that dont want to come out
-
2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communism
-
They're splined into the axle side, some heat and an air chisel, or hammer if you don't got onedirty30 -
i zipped mine off with the angle grinder and then drilled through the remaining bolt. i did that to make ghetto ass discos, but now i just dont run the front one at all.Watch your backhoe, I'm the John Deere man.Comment
-
its all done those are such bitchs to get off2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communismComment
-
yeah they are, howd you get them out? what are you taking them out for?Watch your backhoe, I'm the John Deere man.Comment
-
i was taking them out to put in the nice new jksdiscos in that came with my kit so i can get and alignment i cut the threaded end off with a sawzall then drilled out the bolt then rotated the bolt and used a punch to not it out2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communismComment
Comment