Tweet
Im gonna buy the cor one ton steering for my xj. Just wondering on average, how much will i have to cut the tie rod tube to have it fit? if it matters this is gonna be a otk setup
-
God made the world in seven days, on the 7th day, he made the Le Car
Real Jeeps have Unibodys -
I think we cut like 8-12 inches off mine,-Caleb
Crawl Daddy Champion 2011
1999 XJ 4 inchs of lift or so, 35s and some other stuff. -
mock up the tie rod ends, and use a tape measure. Don't just go ohhh 8 inchs that should be good.
and be sure to leave enough room for adjustability.No worries, I'm not actually back, I'm just reminiscing about the old days.
ForSure Motorsports
Win or Lose, We Booze.
Vice President of Internal Affairs at Dirty Donny's House of HookersComment
-
i wasn't gonna just measure out 8 inches and cut, i didn't to get flustered when i would end up cutting a foot off. Im probably going to measure from half way down each tre threads and go from there, this would account for adjustability correct?God made the world in seven days, on the 7th day, he made the Le Car
Real Jeeps have UnibodysComment
Comment