Scweeeeeet I say go simple simple on the cage. A pillar across and down, B billar across and down, C pillar across and down, Tie them all together triangluate on the roof, harness bar behind the seats, windshield spreader, then go down from the c pillar and tie into the shock hoops.
Done nice and tightly shit would be minty
Also use 1.5 not 1.75, not enough room inside there for tube that big. and 1.5" .120 is fine strength wise
No worries, I'm not actually back, I'm just reminiscing about the old days.
ForSure Motorsports
Win or Lose, We Booze.
Vice President of Internal Affairs at Dirty Donny's House of Hookers
Comment