Originally posted by Supermanxj
View Post
Announcement
Collapse
No announcement yet.
My green Xj
Collapse
X
-
not sure. but with the good shafts in my junk at b2 on one of the rcrocs i was in reverse in the bowls with my rear tires in the air and rear bumper sliding up shit. the whole time i was doing that i was waiting for a boom. but it held up fine and dandy.
-
idk i only plan on running a max of 35's with this set-up, like after i kill the km2's i wanna get a set of 35 krawlers.
I feel like if i can do a rear dig, rev limiting on an obstacle in 2wd with 35's on a stock rear 44 with a locker, there should be no reason a front 44 with chromos shouldn't be able to handle a dig.
ohh well i hope it works haha.
Leave a comment:
-
the internets told me front digs with a 44 is a recipe for explosion, but the internets is wrong about a lot of thingsOriginally posted by greenxj513 View Postchromo'ed hp 44 with 4.56's and ford outers.
that's my summa project
Leave a comment:
-
chromo'ed hp 44 with 4.56's and ford outers.
that's my summa project
Leave a comment:
-
Twin stick with a d30??? hrmmm... you must has other plans if you are going to do digs right???
Leave a comment:
-
http://advanceadapters.com/product/2525/50-3021.html
to mate it up and then i can make a set of sweet ass cable shifters for 100 bucks, and just twin stick it myself.
save some cash in comparison to that kit, which IMO isn't worth it, cause the 231/300 doubler kit is like 600.
Leave a comment:
-
http://www.downeastoffroad.com/miva/...tegory_Code=tc
says for yj but im sure it can be modded for an xj easily
Leave a comment:
-
well i plan on cheating with the flip... just run it upside down with cable shifters.
the advance adapters kit to mate the 300 right to an AW4 is like 250...
idk what the crawl case would cost, gotta check that guy on pirate.
with 4.56's in the axles a ~7:1 low range would be sweetLast edited by Zullock Holmes; 04-06-2010, 06:01 PM.
Leave a comment:
-
Well it all depends on your budget. When i did mikes it cost about 400 to do. but we already had a clocking ringOriginally posted by greenxj513 View Postpicked up my dana 300 today.
debating whether i should just flip it, twin stick it and mate it to the AW4??
or... if i should make a 231 crawl box and then mount it to that.... decisions, decisions.... help me here.
Leave a comment:
-
picked up my dana 300 today.
debating whether i should just flip it, twin stick it and mate it to the AW4??
or... if i should make a 231 crawl box and then mount it to that.... decisions, decisions.... help me here.
Leave a comment:
-
the new uppers are in.
figured i'd take a pic, yes i painted them lime green, i don't care its a suddle touch, very un-noticable and i like the color lime green so
also have the new clayton lca axle mounts on there.


everyone keeps asking me when i'm gonna go to longarms, but i really dont see a need with shortarm angles this flat


ohhh and a flexy shot at the beach..... rears tucked very fast, definite need for rear bumpstops also proved thursday on the rocks

Leave a comment:
-
the superflex joints were 35 a piece from rubicon express, the rest of the steel cost like 10 bucks from logan, i have lots left over too and have the right size hole saw for notching the tube for the joint to fit in. so if you wanna make a set or have me help you make a set, i'll be happy too.
Leave a comment:
Leave a comment: