Wanted to start a build thread on the new jeep. I haven't thought of a great name for it so "Rubber Ducky" is a place holder... maybe it'll stick. Pretty Stoked seing as it is pretty much a dream jeep for me but id like to make some changes to make it my own.
Specs when Purchased May 27, 2017
Engine/Drivetrain
4.6 Golen Stroker engine
42RLE (supposedly going out)
Rubicon 4:1 Transfer case
Axles
Rubicon 44's front and rear (working factory air lockers)
5:13 gears
Suspension/Steering
3" Savvy/Currie lift
JKS ACOS F/R
JKS/Currie Trackbars F/R
Currie Anti-Rock Front
Currie JJ control arms F/R
Currie Correctlync Steering
Bilstien 5100's
Wheels/Tires
315/75 R16 (35") Nitto Trail Grapplers
Stock Rubicon Moab 16"
Misc.
Warn Front bumper with winch plate and trail bar
Griffin Radiator
Derale thermostatic transmission cooler
B&M Trans cooler
Factory hardtop
Factory (I think) soft top with quick disconnect
1" aluminum transmission drop
Engine and Transmission skid (need to pick-up... the guy found it in the back of his garage and told me to come get it.)
KC H4 conversion
K&N CAI (makes a mean noise with the stroker)
Unknown brand TB spacer.
Chrome KC light mounts on a pillar.
GOOFY wide rubicon flares
Banks AutoMind Programmer
Overall plans
I really don't want to change it a lot, just make it more betterer for Stacey to drive and take away some band-aids by the PO
Pic from p/o
Pics of it on the trailer/ at home
And my puppers Wrangler Rubicon loves it!
Sent from my iPhone using Tapatalk
Specs when Purchased May 27, 2017
Engine/Drivetrain
4.6 Golen Stroker engine
42RLE (supposedly going out)
Rubicon 4:1 Transfer case
Axles
Rubicon 44's front and rear (working factory air lockers)
5:13 gears
Suspension/Steering
3" Savvy/Currie lift
JKS ACOS F/R
JKS/Currie Trackbars F/R
Currie Anti-Rock Front
Currie JJ control arms F/R
Currie Correctlync Steering
Bilstien 5100's
Wheels/Tires
315/75 R16 (35") Nitto Trail Grapplers
Stock Rubicon Moab 16"
Misc.
Warn Front bumper with winch plate and trail bar
Griffin Radiator
Derale thermostatic transmission cooler
B&M Trans cooler
Factory hardtop
Factory (I think) soft top with quick disconnect
1" aluminum transmission drop
Engine and Transmission skid (need to pick-up... the guy found it in the back of his garage and told me to come get it.)
KC H4 conversion
K&N CAI (makes a mean noise with the stroker)
Unknown brand TB spacer.
Chrome KC light mounts on a pillar.
GOOFY wide rubicon flares
Banks AutoMind Programmer
Overall plans
I really don't want to change it a lot, just make it more betterer for Stacey to drive and take away some band-aids by the PO
- Lower it 1-2". It is freaking tall. like probably 4.5" and is hard to get in and with the short arms it rides like a dump truck.
- Tummy tuck (I welcome recomendations on brands. so far i really like undercover fab and the lo pro mount).
- Corner armor
- Rear bumper (with or without tire carrier) if without get a body mounted carrier that opens with the hatch.
- rocker guards
- I have the spare rim but need to get a spare tire.
- Wheel it.
- exp it.
- drive it like it is a convertible to work.
- enjoy the fuck out of it.
Pic from p/o
Pics of it on the trailer/ at home
And my puppers Wrangler Rubicon loves it!
Sent from my iPhone using Tapatalk
Comment