Tweet
Nice! Progress. I just checked the gear ratio calculator and with 35's and 3.55 compared to 3.07 with 33's is actually better. 150 rpm higher at 65. So you'll actually be better off.
-
Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.com -
thats the one!!!Originally posted by hoggie101 View Postmy old axle?
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
Details on tires? Or still looking?97 XJ.Comment
-
found some 35 inch km1s
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
I think I know where you found them
Comment
-
Ripped the rear end apart tonight..... going to swap axels and get some new leafs in.....
more photos to follow-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
Whooooo update!!! Hell yeah. Everyone is joining the jeep jackstand club.Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
-
todays progress so far..... going to swap locker and shafts over to the other axle tonight.
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
locker in and got the axel under the jeep....... going to move her and get the front end up........ to start work on long arms
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
front end is almost out....
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
project from yesterday
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
Is it done yet?Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
i wish...... debating if i should get leafs or hiems firstOriginally posted by ct67_72 View Post-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
Hmmmm well all you need in the rear is leafs. You still need a bunch of stuff for the front. If you get leafs now the rear could be done. Then get everything needed for the front so it can be done without waiting for more parts.Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
Comment