4.0 Bellhousing bolts and starter

[wannabejeep]

like the thread says. My friend is doing a 4.0 swap and needs bellhousing bolts and a starter. Anyone know the size of the bolts? I'm going to google it now, but in case I can't figure it out....

[H8PVMT]

i have a set of bolts around somewhere
and pulling a starter with under 1k on it this weekend from my 96

[customcreationsllc]

Need a little more info than that like what transmission.
I have a bell for AX-15 both internal and external but if you have an AX5 that will not work

[wannabejeep]

ah gotcha, I think its a 4.0 and nv3550? or something it's TJ 5 speed running gear.

[customcreationsllc]

How does he plan on passing emissions? I think the NV3500 and the AX-15 have the same bell housing bolt pattern you should do some investigation.

[1cleantj]

How does he plan on passing emissions? I think the NV3500 and the AX-15 have the same bell housing bolt pattern you should do some investigation.

how would he have a problem with emissions ? if its OBD, he would just need to keep emission sensors/no CEL , if older then its ran on a dyne anyways

[wannabejeep]

How does he plan on passing emissions? I think the NV3500 and the AX-15 have the same bell housing bolt pattern you should do some investigation.

it's a 97, so OBDII and I think there's some process you can go through. He was saying something along the lines of, as long as that motor was offered by that manufacturer in that body style, you can do the swap.