death of dual 44's

[hoggie101]

Selling a set of waggy 44's with a tnt truss for a xj and a ruffsruff diff cover-1200
Axles are bare sandblasted and painted blue comes with rear shafts and orginal carriers

Also have a 8.8. Out of an exploder has mounts for disk brakes comes with 4.10gears w/ carrier and I also have a set of 4.88's that'll go with it orgjnal gears still installed-250

Also have four 31's mounted on rims and ballanced will get a brand pictures when mastercraft courser a/t-200 obo

Dana 30 knuckles-30
Dana 30 cailpers and pads obo
Dana 44 front cailpers and pads obo


Text-203 eight four three seven two seven nine

[mcguyver_xj]

are the 44's all set to go in an xj?

[konastinky1234]

dibs on 8.8 and gears

[hoggie101]

are the 44's all set to go in an xj?

The truss isn't welded on yet have to remove a little bit more of the spring perch

[ftrndyrsox]

Second in line for the 8.8 dont really need the 4.88s though

[ninetysix-ex-jay]

Full width? Why are you parting with them?

[hoggie101]

Full width? Why are you parting with them?

I need money for 35's and I'm getting a nine inch and a 44 nigggaaa

[ninetysix-ex-jay]

They`re full width then crackaaaaa?

[justtorchit]

They`re full width then crackaaaaa?

WAGGY's.... aka not full width

[ninetysix-ex-jay]

WAGGY's.... aka not full width

Just checking ass clown

[justtorchit]

ZINNNGGGG!!!!!!!

[mcguyver_xj]

The truss isn't welded on yet have to remove a little bit more of the spring perch

so truss has to be welded on, im assuming rear has to be setup, are they still togethor with gears and everything?

srry just trying to see if i am gonna bother borrowing the money now or just waiting for down the road

[Buffalo Phil]

so truss has to be welded on, im assuming rear has to be setup, are they still togethor with gears and everything?

srry just trying to see if i am gonna bother borrowing the money now or just waiting for down the road

The axles need to be built. There are no gears in them. Front needs to have the truss welded on for it to bolt into an XJ while the rear will bolt into an XJ but you need to weld on shock tabs.

[hoggie101]

The axles need to be built. There are no gears in them. Front needs to have the truss welded on for it to bolt into an XJ while the rear will bolt into an XJ but you need to weld on shock tabs.

I have the rear shafts still and both carriers with gears still on them there just not in the axle I can take a picture if you want

[Ruepart Hoaxley]

Gear ratio on the 44's? that obnoxious 2.71 or whatever it is?