Tweet
Originally posted by tjramplebump
View Post
-
$20? I'd have to swing by and check them out tomorrow to let you know if they were worth saving. THey are the original lines from 99dirty30 -
alright...if they're in anything better then "eh" ill take em'Originally posted by Hydra View Post1998 Jetta GLX VR6 Raceland Optimo coilovers, c2 chip, CAI, straightpipe to magnaflow muffler, e-codes, billet alum. crackpipe. 42 draft designs SAI blockoff.Comment
-
Long arms need to go, bills need to be paid.
Pictured center. Johnny joints on one end, rubber on the other.dirty30Comment
-
how much for long arms? and who makes them?Nick, L
xj 5.5 lift, 32's, long arms
D30 locked, 8.8, Wj swap, and 35's in progress.Comment
-
same i might want them friday maybeh1998 Jetta GLX VR6 Raceland Optimo coilovers, c2 chip, CAI, straightpipe to magnaflow muffler, e-codes, billet alum. crackpipe. 42 draft designs SAI blockoff.Comment
-
Arms are custom made, basically a copy of clayton arms.
May or may not require some fitment, $100dirty30Comment
-
some type of Xmember for those arms?98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuffComment
-
arms i would be interested. pm sent-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)Comment
-
Crossmember already sold. And arms sale pending today.Originally posted by Dirtyjeep92 View Post
Hitch is sold too.
Almost new radiator still there, only 1000one miles on it. Header panel is complete and unkracked. Pass taillight is there, drivers too but it has some cracks, still holds and works fine.
Doors folks, I have one set of fronts, and two rears. $50 a set and you can have a complete working set of spares with glass.
Rear hatch black, a few dents but washer and wiper work. $40dirty30Comment
-
is that steering in the pic still for sale?
edit: just say it a few pages back, is it all straight? If it is Ill take that and probably the front diff guard. Do you think the guard is beefy enough to mount an assist ram off of?Last edited by ct67_72; 04-27-2012, 09:33 AM.Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
The steering is still for grabs. Its straight as rusty steering can be. But the pass side tie rod end on the knuckle got galled as I pulled it, it will need replacing. The guard is strong vertically, not so much laterally, but you could literally just reinforce it side to side with some plate to make it last.dirty30Comment
-
if you'll do 80 on the arms ill buy them this weekend
Comment
-
The lines are shot at the tank ben, I doubt I could get them off in one piece.Originally posted by tjramplebump View Postdirty30Comment
-
oh well =[ guess ill try to nig rig it then1998 Jetta GLX VR6 Raceland Optimo coilovers, c2 chip, CAI, straightpipe to magnaflow muffler, e-codes, billet alum. crackpipe. 42 draft designs SAI blockoff.Comment
-
Pm sent for doors98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuffComment
Comment