Prochargers

[DrThunder]

Who has messed with them or seen em? Would like to hear of people's past experiences. I've done a lot of research and see/hear good things but theres a couple horsepower heads on here who may have come across them.

Anyways, I'm in the market. That is all that is needed to know for now.

[XJLI]

family friend is running one on a 350 ZZII crate motor and has been for ~8k in a 42? chevy coupe. The motor has never given him a problem, and he done a few long drives in it.

[CumminsJeep]

I dont have any experience with them but from what I hear from everyone is that they are good stuff. Thats coming from fox body guys running small blocks.

[justtorchit]

how bout some numbers from johns dyno....

[XJFez]

I know a few guys that run a procharger on their LS1 F-body's. If you're like us and not so fond of nitrous, these are the way to go. I saw numbers on one, not sure what else he did but including the procharger he had a 40% gain. This of course after fuel pump/injectors etc etc.

[justtorchit]

how bout some numbers from johns dyno....

.

[DrThunder]

Last the engine was in the car it was running funny, powerless, basically the main reason that drove me to pull it and put it on the dyno. It made 410 horse so far but the power curve is very fucked up. At least the freeze plug is holding in there. Looking into stuff that I fucked up.

[justtorchit]

interesting......

[crosbike]

this is the 5000 buck engine right?

[Bigbike]

this is the 5000 buck engine right?

[DrThunder]

this is the 5000 buck engine right?

Right, well a little less than that but it's still under warranty. If you guys knew one thing about engines that make power you would know what it costs to build one.

[DrThunder]

And another thing, all of the tests that I've done to the block show just fine. It's looking like an ignition problem combined with a rich condition. Just because something doesn't interst you doesn't mean you need to knock it. I like goin fast so leave my shit alone and continue on being a cocksucker to someone else

[Buffalo Phil]

Right, well a little less than that but it's still under warranty. If you guys knew one thing about engines that make power you would know what it costs to build one.

Actually I do know. My uncle and his group of friends will drop 12k on an engine and not even think twice about it.

The latest big controversy was this dude spent 15k on his drag engine and it grenaded after 5 runs.

[HeavyMetal]

Actually I do know. My uncle and his group of friends will drop 12k on an engine and not even think twice about it.

The latest big controversy was this dude spent 15k on his drag engine and it grenaded after 5 runs.

normally around 15k is when i start thinking 3 times

[DrThunder]

Talkin about alex and caleb