Member's Rig Setups *Pictures/Stats*

[Burton58]

This section is for people to post their detailed stats about their rig.

Post a MAXIMUM OF 3 PICTURES to avoid clutter. If you post more, we will delete anything beyond the first 3.

Try to include a level-ground picture in the set as that is a good indicator of vehicle stance/height/look/so on.

if your information changes, please update your original post. Don't make a new one.

[Burton58]

99 XJ classic
RE 3.5" superflex lift
Blackrock Lobo wheels
1" spacers
33" Goodyear MT/R's
D30, 4.88's, Aussie locker, WJ knuckle swap, Ruffstuff OTK 1 ton steering with offset tierods, tracbar and custom brackets, Riddler cover
29spl 8.25, 4.88's, Aussie locker, Riddler cover
Dizzy's old rear bumper
Brown Dog motor mounts
Bilstein 5150's front, Bilstein yellow body somethings in back
Custom rear shock mount
PORC 231 SYE and front shafts all around
TNT crossmember
AJ's offroad sliders
ZJ gas tank skid
rock rash

[CSaddict]

97 XJ 4.0/AW4/231 Hp30/8.25

Stock
no bumpers
shuts off while running on occasion.
Dented fender.

[Hudson]

99 XJ Limited
4.0/AW4/118k On The Clock (New Head 1,000 Miles Ago.)
Rough Country 4.5" Long Arms
Crager Soft 8 Wheels
BFG KM2 32x11.5x15
D30 Front - 3.55 - Open (Aussie Locker Inbound)
8.25 Rear - 3.55 Open - Disc Brake Conversion.
Front JCR DIY Winch Bumper
Steering Box Brace/Uniframe Tie-In Kit
Currie HD Tie Rod/Drag Link
IRO Double Shear Track Bar
Junk Rough Country Shocks
H4 Headlight Conversion (Best $80 Ever Spent.)
Home-Made Rear Shock Mounts
Home-Made Transfer Case Linkage (NP242)
Home-Made Sway Bar Disconnects
Some Back Up Lights & A Roofrack

Future Plans;

Locked (not sure what locker) 8.8 In The Rear - 4.88s - trussed maybe - reinforced diff cover
Locked (not sure what locker) 44 in the front - 4.88s - trussed maybe - reinforced diff cover
Hack n' Tap SYE for the 242. (with front XJ shaft)
Warn M8000 Winch
Rockers/Sliders
Gas Tank Skid
Some More Armor
50" LED Light Bar
Rear Tire Carrier Bumper
BFG KM2 35x12.5x15s

Some other stuff i'm probably forgetting.

[StompJrKz400]

damn... i is not a member

[Burton58]

damn... i is not a member

Lol it doesn't matter just make one. This was from the old forum so it'll be nice to see what the new people have years later

[StompJrKz400]

first rig ( sold)
87 samurai
was a farmers vehicle for 14 years. sold because i couldn't stop body rust and electrical problems




current rig is a 94 yj

did frame off and rebuilt frame and body

2.5 with ax5 and welded d35.
built to be narrow and drive fast through quad trails and pipelines.

to-do

skid plate flush
spring over axle
8.25 or greater conversion
31's or 33's

[Pete]

1995 Wrangler
4.0 turbo, externally wastegated at 6psi, stock internals
SOA with stock springs and add a leafs
Re-centered hummer H1 wheels with pressed centers
36x12.50x16.5 bias TSL's
Front HP dana 60 w/Spartan locker, WFO concepts full cross over steering. Hydro assist going on this week. Solid diff cover
Rear dana 60, full spool, disk brake conversion with chevy front rotors and calipers. Solid diff cover
Full cage with co2 mount corbeau baja ss suspension seats
Poision Spyder tube fenders and rear quarter guards with Banditt sliders.

[Pedro]

2000 WJ V8 Limited

Suspension:
4" RCX Coils
.75" KOR coil spacers
Bilstein 5100/5125 shocks
IRO front adj. uppers/fixed lowers
IRO rear adj. lowers
IRO rear adj. upper A-arm
JKS Track bar
IRO front upper coil retainers

Wheels/Tires:
285/75R16 Toyo Open Country MT
16x7 Silverblades
Rough Country 1.5" Wheel spacers

Protection:
IRO T-Case skid
JCR Stage 2 sliders
ProtoFab Dually bumper w/ Rigid Dually 2x2's going on
MileMarker SEC8 Scout winch w/ synthetic rope to go with bumper

Engine/Drivetrain:
4.7L V8, 190k miles
K&N FIPK intake
Magnaflow cat and Flowmaster 70 Series muffler from Kolak
Dana 30 - factory LSD, 3.73 gears, PSC cover
Dana 44a - factory LSD, 3.73 gears, BTF cover, skid/truss to be welded on
NP242HD Selec-Trac case swap
Carolina Driveline Double Cardan front driveshaft

Other:
RCX dual steering stabilizers
RC swaybar disco's
OEM Mopar front towhooks
Rola rack
Stickers

[konastinky1234]

01 TJ SE

2.5/ax-5/np231
8.8/HP30 w/aussies and 4.88s
4 inches with some clayton parts and a mixture of everything else to make a lift
custom heim steering(shits heavy)
35" KM2s on some streetlocks don't know brand
olympic 4x4 rockers
superwinch lp8500
light bar
custom cone air intake
throttle body spacer
tatton rear shaft and SYE
dual tops/full doors
genright 6in fenders
1.5in wheel spacers
custom 1/4 tcase skid
spintech exhaust


[IMG][/IMG]



[IMG][/IMG]




[IMG][/IMG]

[Henchman]

97 TJ

4" Clayton Long Arms
Hp30 , 8.8, 4.88s, Aussie and Spartan
35" Kevlars on Black Rocks
LOD Rear Bumper
OR FAB rockers
JCR won ton
poison spyder tube fenders, crusher corners and cage
And a bunch of other shit I'm too lazy to type.

[ct67_72]

Ill play.
2000 XJ. 4.0/AW4/231. AA Sye.
106.5" wheelbase.
D60 front. Welded. 5.13's, DOM/heim steering. Surplus center hydro assist.
D70 rear, detroit, 5.13's.
17x8.5" TrailReady beadlocks. 39.5" Iroks.
14" BBC front shocks. 12" rear.
3 link front mid-arm. 2" .25" wall DOM. Ruffstuff heims.

[Dirtyjeep92]

98 xj 4.0 auto 231 w/ AA SYE w/ auto front shaft
4.5" RC coils/ misc AAL w/ shackle
RockyRoad drop brackets w/ RE adj flex arms
10" 5150s up front RC 4.5 shocks rear
HP30 3.55s Aussie locked
xj 44 3.55s Spartan locked awaiting 4.88s install
35 dunlop mudrovers
jcr stage 2 sliders
Clayton TB, JCR steering box spacer, LII front stiffies awaiting install

[customcreationsllc]

Some assembly required

Quick run down.
Ecotec 2.2
Ax15
Atlas 5.0
Front
D60 spools 5.38
14" Fox 2.0
3 Link
Full Hydro

Rear
D60 spools 5.38
14" Fox 2.0
3 Link

http://www.pirate4x4.com/forum/gener...creations.html

[HeavyMetal]

this is an exact duplicate of an existing thread.....

http://sisoffroad.com/forums/showthr...27s+Rig+Setups