Announcement

Collapse
No announcement yet.

P.I. is stupid.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P.I. is stupid.

    Who can see whats wrong here
    Attached Files
    98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuff

  • #2
    His muffler bearing is loose
    Hench

    ATM anyone?

    Comment


    • #3
      Wow, that's retarded. So someone put the bearing and race on the shaft instead of the race in the axle tube, backwards?
      That's a new one
      Dan.
      2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro

      http://www.facebook.com/people/Dan-M...00000913365979
      www.DMROFFROAD.com

      Comment


      • #4
        ya race or bearing is backwards
        -Caleb

        Crawl Daddy Champion 2011

        1999 XJ 4 inchs of lift or so, 35s and some other stuff.

        Comment


        • #5
          When caleb knows whats wrong it must be bad!
          Dan.
          2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro

          http://www.facebook.com/people/Dan-M...00000913365979
          www.DMROFFROAD.com

          Comment


          • #6
            Originally posted by ct67_72 View Post
            When caleb knows whats wrong it must be bad!
            - Will


            Originally posted by fizzy
            or am asians pants not a read end lol.
            Originally posted by DizzDizz
            aliens probed my husband

            Comment


            • #7
              ya. think was a B**** and a half to get out too. everyone says ohh they just "pop out" nope this guy wipps out a slider hammer
              98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuff

              Comment


              • #8
                Originally posted by ct67_72 View Post
                When caleb knows whats wrong it must be bad!
                ive changed a lot of 44 bearings....
                -Caleb

                Crawl Daddy Champion 2011

                1999 XJ 4 inchs of lift or so, 35s and some other stuff.

                Comment


                • #9
                  Originally posted by Bigbike View Post
                  ive changed a lot of 44 bearings....
                  haha, I was thinking you were pretty familiar with them.
                  Dan.
                  2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro

                  http://www.facebook.com/people/Dan-M...00000913365979
                  www.DMROFFROAD.com

                  Comment


                  • #10
                    The hammer on the bottom right is far to small

                    Comment


                    • #11
                      UGHH i have to replace my SET10 when i get home, not looking forward to it
                      2005 Jeep Wrangler Rubicon Unlimited
                      1945 Willys-Overland CJ2A

                      Comment

                      Working...
                      X