Does anyone have an XJ 44 driver side axle shaft

[HeavyMetal]

http://www.superioraxlegear.com/axle...5-p-14435.html

http://www.superioraxlegear.com/axle...5-p-14436.html

the two shafts you need, $117 a piece. BAM. Superior make nice stuff, i have all superior shafts and R&P's in my new truck.

fronts?

[Zullock Holmes]

I dont really need to buy alloys if someone were to just conveniently sell me their stock ones in advance.

the shaft was ground down, there wasnt the option for the proper bearing. there was uncertainty the entire time..........but im not complaining at all, it just is what it is, looking to solve it and keep my options safe.

I only hit the burr with the grinder and didn't go all the way down, hence the terribly painful piece of metal that pierced my finger lol.... Tolerance on the shaft is good past where the bad retainer fucked it all up.

I still can't believe that was .012 smaller than it should have been. REDICULOUS. fuck NAPA bearings.

[Zullock Holmes]

fronts?

Superior isn't good at updating their pictures, those part numbers are rear shafts. lengths 29.25" and 29.75", 30 spline dana 44

[HeavyMetal]

Superior isn't good at updating their pictures, those part numbers are rear shafts. lengths 29.25" and 29.75", 30 spline dana 44

roger that, good options, thanks for the links. ill see where i stand when i get back from KOH. and yes fawk chinkmanese NAPA

[Jeep Creep]

I still can't believe that was .012 smaller than it should have been. REDICULOUS. fuck NAPA bearings.

[HeavyMetal]

[Jeep Creep]

ive honestly never heard of that happening, but just read this in an article. The other line of bearings we carry are SKF

The counterfeit Louis Vuitton bags you can buy in China's fake markets may fall apart on you quickly, but at least they won't kill you. A phony bearing that doesn't meet the technical specs could. A recent onslaught of bogus after-market bearings in China has created a major headache for legitimate bearing makers like SKF and Timken, who say that it's often very difficult to distinguish the fakes from the non-fakes.

[HeavyMetal]

are you goingto be at work tomorrow justin even if it snows? i am definitely going to come get those axle shafts. found out mine i believe is bent

2nd d44 axle shaft i have bent now

[Jeep Creep]

hardcore

[HeavyMetal]

so i got what i needed but its a loaner

now does anyone wanna sell one?