Yeahhhhhhhh, wrong.
Announcement
Collapse
No announcement yet.
FAIL
Collapse
X
-
Comment
-
Olympic 4X4 Products Reverse-a-Bars
For 87-06 JeepĀ® Wrangler YJ & TJ
Clever design allows bars to be installed with bends either facing up or down. Reverse-a-Bars are made from 1.5” round heavy-wall steel tubing. The bars in the “up” position give maximum ground clearance while the bars in the “down” position provide a useful step. Reverse-a-Bars are easy to install with no drilling required.
http://www.quadratec.com/products/13116_110X_PG.htm
Comment
-
Originally posted by ninetysix-ex-jay View PostNo.Originally posted by crosbike View PostOlympic 4X4 Products Reverse-a-Bars
For 87-06 JeepĀ® Wrangler YJ & TJ
Clever design allows bars to be installed with bends either facing up or down. Reverse-a-Bars are made from 1.5” round heavy-wall steel tubing. The bars in the “up” position give maximum ground clearance while the bars in the “down” position provide a useful step. Reverse-a-Bars are easy to install with no drilling required.
http://www.quadratec.com/products/13116_110X_PG.htm
-98 XJ 4.5" lift , 35's, trimmed, locked, geared, flexy
-14 Subaru STI hatch Stage 2ish
-54 Dodge Power wagon M-37
-57 GMC Pickup
-Tim (OIIIIIO)
Comment
Comment