New Toy!

[Henchman]

nice bike dude!

time for some MODS!!!!!

gearing, pipe, fmf programer and you will have a new bike!!! trust me, they are PIGS stock

what kind of gearing did you have?

I've been looking around and searching all the mods. I'm gonna do all the free ones first

[Jeep Creep]

i just got the same hemlet. its really stable at high speeds even with the visor.

[HeavyMetal]

hemlet.

[Buffalo Phil]

Fuckin Hemlet.

[Jeep Creep]

fucking christ

[Lawn Guyland]

[ame]http://www.youtube.com/watch?v=8-g7E8OUofY[/ame]

[grundlepunch]

what kind of gearing did you have?

I've been looking around and searching all the mods. I'm gonna do all the free ones first

down 1 in the front and 2 up on the back (mine stock was a 43 tooth, but the x might be different).

I would go down 1 tooth in the front FIRST, its like $13 and easy to install. When you order the sprocket be sure to order a new sprocket nut, they are not reusable and have a lip on the outside that you need to punch in with a hammer and punch. To get the old one off you need to pry up this indent or just use an impact.

if going down 1 in the front isn't enough you can go up 2 teeth in the rear and still have the stock chain.

[grundlepunch]

also dont open up the airbox without putting on a fuel programmer. those bikes are lean stock and you will only make it worse